ELCB Tester
ELCB Tester
ELCB Tester
- Taut band movement
- Wiring check
- Robust
- Two and three wire operation
- No batteries
Technical Specification
| Operating Voltage | 550 |
| ELCB current | 10mA - 50mA |
| Current Selection | Knob |
| Frequency of Operation | 50/60Hz |
| Accuracy |
|
| Operating | 550Vac @ ± 15% |
| Voltage (L-E) | 1% (1mA) |
| Meter | ±1% of full scale |
| Protection |
|
| Operator Temperature | -5˚C to 45˚C |
| Fuse Protected | 0,1A Fast Blow |
- Micro-processor controlled
- Fully programmable
- Direct read out of time/current
- Voltage measurement during test
- Suitable for industrial, mining and domestic environments
- Each phase tested separately on a 3 phase system
Technical Specification
| Rated tripping current at 317 Volts | 0 to 1000mA |
| Resolution | 1mA |
| Operating voltage | 100 to 450V AC |
| Maximum trip time | 100 secs |
| Resolution | 1m sec |
| Accuracy |
|
| Rated trip current | 1% (1mA) |
| Voltage measurement | 1% (1V) |
| Rated trip time | 1ms |
| Operating temperature | 0ºC to 40ºC |
| Humidity (%) | 80 |
| Phase angle setting | 0 & 180º selectable |
Model Specification
| Dimensions (mm) | 170(L)x165(W)x92(H) |
| Power Source | 8 x 1,5 AA Batteries |
| Weight | 1,5kg |